Bulid A Storage Liquor Cabinet Furniture

Author: admin | Categories: Bar Cabinet,Home Bars comments
Liquor Cabinet Furniture

To build your own liquor cabinet furniture, all you need is a couple of sheets of plywood and some wood screws. Draw a sketch of your design of liquor storage cabinet on a sheet of paper. Measure the dimensions of the space you intend to fill your liquor cabinet with a tape measure. Use a circular saw to cut two 1/2 inch pine needles to length and depth of his liquor storage cabinet.

Install the four pieces of pine just cut in rectangular form, placing boards upright on its long narrow edges. Place the side panels between the ends of the upper and lower panels. Cut another piece of pine half-inch to the length and height dimensions of your liquor cabinet furniture. Place this flat panel on top of the newly built frame and secure in place by driving nails from a nail gun through the panel in the frame below.

Flip the cabinet frame on which the open side up.Use circular saw to cut pine shelves half-inch saw.  Building a door for your liquor cabinet to cut another piece of pine half-inch to the length and height dimensions of your cabinet. Fill all nail and screw holes with wood filler and let dry completely. Paint or stain your liquor cabinet furniture storage.

Comments are closed.